XBOX One, XBOX One S, XBOX One X are all 3rd generation XBOX consoles released by Microsoft.  All Arcooda Game Wizard arcade machines support XBOX One consoles.


Step 1. Inside your machine, check that your joystick control panel wiring is setup for console/PC play. (please check your manual for location).

Step 2. After installing your XBOX One inside the machine, plug in the Machine HDMI cable into your XBOX One.


Step 3. Depending on your machine configuration, please check the audio cables connected to the Arcooda amplifier are labelled as Console/PC. If there is no facility in your existing Game Wizard machine for audio output from the XBOX One to the machine, its easily solved by purchased an audio extractor from us (this is a simple device that goes from the HDMI cable creating an audio output that can be plugged into the Arcooda amplifer).

Step 4. Plug in the Highway I/O board USB twin ended cable into your XBOX One.

Step 5. Change the front multimedia control panel set to Console. Depending on your machine configuration, the location of this switch will vary.


Step 6. Install your wired hand controllers into the front USB control panel, or, connect the wired hand controllers directly into the Highway I/O board inside your machine, or, use 3rd party adapters such as Magicboot USB drives. Hand controllers must be connected to activate the XBOX One.



- Game Wizard Panel Switch = Console
- Hand Controllers Connected = Yes


Warning: Wireless XBOX One hand controllers need to be connected to your arcade machine via USB cable. However, cable quality will influence performance (and may not register If the cable is low standard).

Setup Instruction